Machined cylinders for use of Moonclips can still be used with or without Moonclips, just as the revolver was designed & manufactured.  Video demo on Resources\Videos menu tab.

S&W: Blue Steel, Stainless Steel & Titanium cylinders: 5, 6, 7 & 8 Shot.

J - Frame Models Examples:  5 - Shot
Model 36, 60, 640, 642, 442, etc. 38/357 Calibers

K - Frame Models Examples:  6 - Shot
Model 10, 19, 64, 66, etc. 38/357 Calibers

L - Frame Models Examples:  6 & 7 Shot
Model 586, 686 etc. 38/357 Calibers
Model 69 .44 Mag 5 Shot

N - Frame Models Examples: 6 & 8 Shot
Model 27, 624, 625 LC, 629, etc.  38/357 -  44/45 Calibers

X - Frame Models Examples: 5 - Shot
Model 460 converted to shoot .45 acp with moonclips
Model 500 converted to shoot .50 GI with moonclips

$150 to machine / chamfer and return your cylinder
$65 for (10) Stainless Steel Match Moonclips (.025)
$50 for Moon Clip Loading Tool (prevents bending)
$20 for Moonclip Stripper Tool (prevents  bending)

Total: $285.00

Machining your S&W Model 25 & 625 45LC cylinder to shoot .45 acp.  

You can still shoot the original rimmed cartridge caliber without moonclips, just as you do before the modification.

$150 to machine & chamfer cylinder. 
$20 for (10) .45 acp Blue Steel (.040) TK Moonclips

Total: $170.00

Rechambering your J, K, L & N cylinder to shoot 9mm: 5, 6, 7 & 8 Shot Cylinders
When rechambered to 9mm the cylinder will still shoot 38 SPL or 357 with or without the proper moonclip.

$300 to rechamber cylinder, machine & chamfer cylinder. 
$75 for (10) 9mm (.035) S/S Moonclips

Total: $375.00


NOTE:

Our work on cylinders rechambered to 9mm are LIMITED to our customer's using standard 9mm ammo or low pressure reloads, which are 34,000 - 35,000 psi chamber pressure or less. Same chamber pressures apply to firing of .38 SPL & .357 Mag.

Absolutley NO 9mm Nato, 9mm +P or 9mm +P+, all which are far beyond the 34,000 - 35,000 psi chamber pressure our conversion is intended for. Usually 38,500 psi, which WILL Stick!

If you try to use these high pressure ammo, you will experience cases sticking in all chambers. 

We cannot warranty our work, if you disregard our warning/notice on high pressure ammo.

When rechambered to 9mm the cylinder will still shoot NON-HIGH Pressure ammo, 38 SPL or 357 Mag with or without the proper moonclip.

Ruger: Blue Steel, Stainless Steel Cylinders

Model Examples: 5 - Shot (Small Frame)
Model SP-101 or LCR -  38/357 Calibers

Model Examples: 6 - Shot (Medium Frame)
Model GP-100 -  38/357 Calibers

Model Examples: 6 - Shot (Large Frame)
Model Redhawk, Super Redhawk -  38/357, 41 Mag, 44 Mag, 45LC & .454 Casull Calibers

Model Redhawk -  38/357
8 - Shot NEW MODELS: 5059 & 5060

$150 to machine / chamfer and return your cylinder
$65 for (10) Stainless Steel Match Moonclips (.025)
$50 for Moon Clip Loading Tool (prevents bending)
$20 for Moonclip Stripper Tool (prevents  bending)

Total: $285.00

Machining your Ruger Redhawk & Super Redhawk 45 caliber cylinder to shoot .45 acp. You can still shoot the original rimmed cartridge caliber without moonclips, just as you do before the modification. Click on this RUGER link for further info on the Redhawk.

$170 to machine & chamfer cylinder. 
(10) .45 acp Blue Steel (.040) Included.

Total: $170.00

Rechambering your Ruger SP-101, LCR, Security Six & GP-100 cylinder to shoot 9mm: 5 & 6 Shot Cylinders
When rechambered to 9mm the cylinder will still shoot 38 SPL or 357 with or without the proper moonclip.

$300.00 to rechamber cylinder, machine & chamfer cylinder. 
$75.00 for (10) 9mm (.035) S/S Moonclips

Total: $375.00

Taurus: Blue Steel Cylinders

Model Examples: 7 - Shot (Medium Frame)
Model 617 & 627 -  38/357 Calibers

Model Examples: 8 - Shot (Large Frame)
Model 608: 38/357 Caliber

$150.00 to machine / chamfer and return your cylinder
$65 for (10) Stainless Steel Match Moonclips (.025)
$50 for Moon Clip Loading Tool (prevents bending)
$20 for Moonclip Stripper Tool (prevents  bending)

Total: $285.00

Rechambering your Taurus 617, 627 or 608 cylinder to shoot 9mm: 7 & 8 Shot Cylinders
When rechambered to 9mm the cylinder will still shoot 38 SPL or 357 with or without the proper moonclip.

$300.00 to rechamber cylinder, machine & chamfer cylinder. 
$75.00 for (10) 9mm (.035) S/S Moonclips

$375.00

Regretfully we have recently ran into some Taurus revolver cylinders (Other than the Model 617, 627 & 608) that are so far out of spec in areas, that we are un-willing to attempt any moonclip machining. We do apologize for any inconvenience that this may cause. We are not by any means saying anything bad about Taurus, just that we have run into some issues and will no longer be able to work on them.

Fill out the (Work Order) and ship us the cylinder assembly, payment info or have us call you when the work is done.

In Shop time for machining cylinders is now 1-2 business days 
Plus transportation both ways.

Payment can be by Credit Card or Certified Funds

Ship to:

TK Custom 
503 N Church St / PO Box 333
Thomasboro, IL  61878

9 AM - 12 Noon & 1 PM - 5 PM 
Monday - Friday
Saturday By Appointment Only!
Central Standard Time
E-Mail: This email address is being protected from spambots. You need JavaScript enabled to view it. 

Shop: 217.643.2002

Just send the cylinder assembly, NO gun.

Example of the machine your cylinder for Full Moonclips

To machine your cylinder we need the COMPLETE Cylinder Assembly. DO NOT disassemble as we will do that. 

Machining /  Many more Revolvers can be done. Call with questions. (Some Colt, Rhino, Schofield & Foreign Model Copies)